User's Manual

Operation Manual
135
Table 13-4 Description of FTP parameters
Parameter
Description
Server IP
The IP address of the FTP server.
Port
The port number of the FTP server.
Username
The username to log in to the FTP server.
Password
The password to log in to the FTP server.
Storage Path
The destination path in the FTP server.
Directory Structure
Set the directory structure, and you can select
Use Level 1
Directory
,
Use Level 2 Directory
, and
Use Level 3 Directory
Level 1 Directory
Set the Level 1 directory name, and you can select from
Device
name
,
Device IP
, and
Custom
.
When you select
Custom
, please enter the custom directory.
Level 2 Directory
Set the Level 2 directory name, and you can select from
File
Type
,
Date
,
File Type_Channel Number
, and
Custom
.
When you select
Custom
, please enter the custom directory.
Level 3 Directory
Urgently store to local
Click , and when the FTP server does not work, all the
files are saved to the internal SD card.
Step 6 Click
Save
.
Step 7 Click
Test
to test whether FTP function works normally.
13.4.2.2 NAS
Enable this function, and you can save all the files in the NAS.
Step 1 Select
Record
>
Storage
.
Step 2 Select the recording strategy in
Disk Full
.
●
Overwrite
: Cyclically overwrite the earliest video when the disk is full.
●
Stop
: Stop recording when the disk is full.
Step 3 Select
Network storage
in
Storage Method
, and select
NAS
to save the recorded
videos in NAS server.
Step 4 Select NAS protocol type.
●
NFS
(Network File System): A file system which enables computers in the same
network share files through TCP/IP.
●
SMB
(Server Message Block): Provides shared access for clients and the server.