User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Configuration Flow
- 3 Device Initialization
- 4 Login
- 5 Main Interface
- 6 Setting
- 6.1 Local
- 6.2 Camera
- 6.2.1 Setting Image Parameters
- 6.2.2 Setting Encode Parameters
- 6.2.2.1 Encode
- 6.2.2.2 Overlay
- 6.2.2.2.1 Configuring Privacy Masking
- 6.2.2.2.2 Configuring Channel Title
- 6.2.2.2.3 Configuring Time Title
- 6.2.2.2.4 Configuring Location
- 6.2.2.2.5 Configuring Font Properties
- 6.2.2.2.6 Configuring Picture Overlay
- 6.2.2.2.7 Configuring Custom Title
- 6.2.2.2.8 Configuring Target Statistics
- 6.2.2.2.9 Configuring Face Detection
- 6.2.2.2.10 Configuring Face Recognition
- 6.2.2.2.11 Configuring Face Statistics
- 6.2.2.3 ROI
- 6.2.3 Setting Audio Parameters
- 6.3 Network
- 6.4 Event
- 6.5 Storage
- 6.6 System
- 6.7 System Information
- 6.8 Setting Log
- 7 Live
- 8 AI
- 9 Camera
- 10 Event
- 11 System
- 12 Security
- 13 Record
- 14 Picture
- 15 Report
- Appendix 1 Cybersecurity Recommendations
Operation Manual
118
12.3 Attack Defense
12.3.1 Firewall
Configure firewall to limit access to the camera.
Step 1 Select
Security
>
Attack Defense
>
Firewall
.
Step 2 Click to enable the firewall function.
Figure 12-6 Firewall
Step 3 Select the mode:
Allowlist
and
Blocklist
.
●
Allowlist
: Only when the IP/MAC of your PC in the allow list, can you access the
camera. Ports are the same.
●
Blocklist
: When the IP/MAC of your PC is in the block list, you cannot access the
camera. Ports are the same.
Step 4 Click
Add
to add the host IP/MAC address to
Allowlist
or
Blocklist
, and then click
OK
.
Figure 12-7 Firewall
Step 5 Click
Apply
.
Related Operations
● Click to edit the host information.
● Click to delete the host information.