User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Configuration Flow
- 3 Device Initialization
- 4 Login
- 5 Main Interface
- 6 Setting
- 6.1 Local
- 6.2 Camera
- 6.2.1 Setting Image Parameters
- 6.2.2 Setting Encode Parameters
- 6.2.2.1 Encode
- 6.2.2.2 Overlay
- 6.2.2.2.1 Configuring Privacy Masking
- 6.2.2.2.2 Configuring Channel Title
- 6.2.2.2.3 Configuring Time Title
- 6.2.2.2.4 Configuring Location
- 6.2.2.2.5 Configuring Font Properties
- 6.2.2.2.6 Configuring Picture Overlay
- 6.2.2.2.7 Configuring Custom Title
- 6.2.2.2.8 Configuring Target Statistics
- 6.2.2.2.9 Configuring Face Detection
- 6.2.2.2.10 Configuring Face Recognition
- 6.2.2.2.11 Configuring Face Statistics
- 6.2.2.3 ROI
- 6.2.3 Setting Audio Parameters
- 6.3 Network
- 6.4 Event
- 6.5 Storage
- 6.6 System
- 6.7 System Information
- 6.8 Setting Log
- 7 Live
- 8 AI
- 9 Camera
- 10 Event
- 11 System
- 12 Security
- 13 Record
- 14 Picture
- 15 Report
- Appendix 1 Cybersecurity Recommendations
Operation Manual
110
Step 7 Set parameters.
Table 8-10 Description of crowd map parameters
Parameter
Description
People Flow Statistics
Click next to
People Flow Statistics
to count the number
of people in the detection area.
Flow Statistics
(Non-motor Vehicle)
Click next to
Flow Statistics (Non-motor Vehicle)
to
count the number of non-motor vehicles in the detection area.
Traffic Flow Stat
Click next to
Traffic Flow Statistics
to count the number
of motor vehicles in the detection area.
OSD
Click
OSD Info
, and the
Overlay
interface is displayed. Click
next to
Enable
to enable the target statistics function. For
details, see "6.2.2.2.8 Configuring Target Statistics".
Snapshot Mode
● Optimized: Capture the pictures until the vehicle disappears
from the image, and report the clearest picture.
● Tripwire: Capture the pictures when the vehicle triggers
tripwire as the configured direction.
1. Select
Tripwire
.
2. Select the direction from
A to B
,
B to A
, and
Both
.
3. Adjust the position of rule line as needed..
Step 8 Set arming periods and alarm linkage action. For details, see "6.4.1.2 Alarm Linkage".
Click
+ Event Linkage
to set the linkage action.
Step 9 Click
Apply
.
To view alarm information on the alarm subscription tab, you need to subscribe
relevant alarm event. For details, see "6.4.1.3.2 Subscribing Alarm Information".
8.5.3 Viewing Video Metadata Result
Generate data of video metadata recognition in report form.
Step 1 Select
Setting
>
Event
>
Video Metadata
>
Report
.
The
Report
interface is displayed.
Step 2 Select the report type, start time, end time, and other parameters.
Step 3 Click
Search
to complete the report.
The statistical results are displayed. Click
Export
to export the statistical report.