User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Configuration Flow
- 3 Device Initialization
- 4 Login
- 5 Main Interface
- 6 Setting
- 6.1 Local
- 6.2 Camera
- 6.2.1 Setting Image Parameters
- 6.2.2 Setting Encode Parameters
- 6.2.2.1 Encode
- 6.2.2.2 Overlay
- 6.2.2.2.1 Configuring Privacy Masking
- 6.2.2.2.2 Configuring Channel Title
- 6.2.2.2.3 Configuring Time Title
- 6.2.2.2.4 Configuring Location
- 6.2.2.2.5 Configuring Font Properties
- 6.2.2.2.6 Configuring Picture Overlay
- 6.2.2.2.7 Configuring Custom Title
- 6.2.2.2.8 Configuring Target Statistics
- 6.2.2.2.9 Configuring Face Detection
- 6.2.2.2.10 Configuring Face Recognition
- 6.2.2.2.11 Configuring Face Statistics
- 6.2.2.3 ROI
- 6.2.3 Setting Audio Parameters
- 6.3 Network
- 6.4 Event
- 6.5 Storage
- 6.6 System
- 6.7 System Information
- 6.8 Setting Log
- 7 Live
- 8 AI
- 9 Camera
- 10 Event
- 11 System
- 12 Security
- 13 Record
- 14 Picture
- 15 Report
- Appendix 1 Cybersecurity Recommendations
Operation Manual
107
Parameter
Description
Sensitivity
● For fast moving, sensitivity is related to the triggering speed.
Lower sensitivity requires faster moving speed to trigger the
alarm.
● For crowd gathering, sensitivity is related to the alarm
triggering time. It is easier to trigger the alarm with higher
sensitivity.
Step 8 Set arming periods and alarm linkage action. For details, see "6.4.1.2 Alarm Linkage".
Click
+ Event Linkage
to set the linkage action.
Step 9 Click
Apply
.
To view alarm information on the alarm subscription tab, you need to subscribe
relevant alarm event. For details, see "6.4.1.3.2 Subscribing Alarm Information".
8.5 Setting Video Metadata
Classify people, non-motor vehicles and motor vehicles in the captured video, and display the
relevant attributes on the live interface.
8.5.1 Global Configuration
Set the global configuration of video metadata, including face parameter and scene parameter.
Step 1 Select
AI
>
Smart Plan
.
Step 2 Click next to
Video Metadata
to enable video metadata of the corresponding
channel, and then click
Next
.
Step 3 Click the
Global Config
tab.
Step 4 Set parameters.