User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Configuration Flow
- 3 Device Initialization
- 4 Login
- 5 Main Interface
- 6 Setting- 6.1 Local
- 6.2 Camera- 6.2.1 Setting Image Parameters
- 6.2.2 Setting Encode Parameters- 6.2.2.1 Encode
- 6.2.2.2 Overlay- 6.2.2.2.1 Configuring Privacy Masking
- 6.2.2.2.2 Configuring Channel Title
- 6.2.2.2.3 Configuring Time Title
- 6.2.2.2.4 Configuring Location
- 6.2.2.2.5 Configuring Font Properties
- 6.2.2.2.6 Configuring Picture Overlay
- 6.2.2.2.7 Configuring Custom Title
- 6.2.2.2.8 Configuring Target Statistics
- 6.2.2.2.9 Configuring Face Detection
- 6.2.2.2.10 Configuring Face Recognition
- 6.2.2.2.11 Configuring Face Statistics
 
- 6.2.2.3 ROI
 
- 6.2.3 Setting Audio Parameters
 
- 6.3 Network
- 6.4 Event
- 6.5 Storage
- 6.6 System
- 6.7 System Information
- 6.8 Setting Log
 
- 7 Live
- 8 AI
- 9 Camera
- 10 Event
- 11 System
- 12 Security
- 13 Record
- 14 Picture
- 15 Report
- Appendix 1 Cybersecurity Recommendations
Operation Manual 
106 
Rule 
Description 
Missing object 
triggered if pedestrian or vehicle stays for a long time. If the 
abandoned object is smaller than pedestrian and vehicle, 
set the target size to filter pedestrian and vehicle or properly 
extend the duration to avoid false alarm triggered by 
transient staying of pedestrian. 
●  During the detection of crowd gathering, false alarm might 
be triggered by low installation height, large percentage of 
single person in an image or obvious target occlusion, 
continuous shaking of the camera, shaking of leaves and 
tree shade, frequent opening or closing of retractable door, 
or dense traffic or people flow. 
Fast moving 
Parking detection 
Crowd gathering 
Loitering detection 
Step 6  (Optional) Click other icons at the right side of the image to filter targets in the image. 
●  Click    to draw the minimum size of the target, and click    to draw the 
maximum size of the target. Only when the target size between the maximum size 
and the minimum size, can the alarm be triggered. 
●  When the rule of crowd gathering is configured, you do not need to set target filter, 
but draw the minimum gathering area. Click    to draw the minimum gathering 
area in the scene. The alarm is triggered when the number of people in the 
detection area exceeds the minimum area and the duration. 
●  Click  , and then press and hold the left mouse button to draw a rectangle, the 
pixel size is displayed. 
●  Click    to delete the detection line. 
Step 7  Set rule parameters for IVS. 
Table 8-8 Description of IVS parameters 
Parameter 
Description 
Direction 
Set the direction of rule detection. 
●  When setting tripwire, select 
A->B
, 
B->A
, or 
A<->B
. 
●  When setting intrusion, select 
Enter
, 
Exit
, or 
Both
. 
Action 
When setting intrusion action, select 
Appears
 or 
Cross
. 
Target Filter 
Click    to enable this function. 
●  When you select 
Human
 as the alarm target, an alarm will be 
triggered when the system detects that persons trigger the 
rule. 
●  When you select 
Motor Vehicle
 as the alarm target, alarm 
will be triggered when the system detects that vehicle triggers 
the rule. 
Duration 
●  For abandoned object, the duration is the shortest time for 
triggering an alarm after an object is abandoned. 
●  For missing object, the duration is the shortest time for 
triggering an alarm after an object is missing. 
●  For parking detection, crowd gathering, or loitering detection, 
the duration is the shortest time for triggering an alarm after 
an object appears in the area. 










