User's Manual

Operation Manual
92
8.2.2.2 Adding Face Picture
Add face picture to the created face database. Single adding and batch importing are
supported.
Requirements on face pictures.
● A single face picture size is 50K–150K in JPEG format. The resolution is less than 1080p.
● Face size is 30%–60% of the whole picture. Pixel should be no less than 100 pixels
between the ears.
● Taken in full-face view directly facing the camera without makeup, beautification, glasses,
and fringe. Eyebrow, mouth and other face features must be visible.
8.2.2.2.1 Single Adding
Add face pictures one by one. Select this way when you need to add a small number of face
pictures.
Step 1 On the
Face Database Config
interface, click next to the face database to be
configured.
Step 2 Click
Register
.
Step 3 Click
Upload
, select a face picture to be uploaded, and then click
Open
.
You can manually select the area for a face. After uploading picture, select a face and
click
Confirm Screen
. When there are multiple faces in a photo, select the target face
and click
Confirm Screen
to save face picture.