User's Manual

User’s Manual
83
Table 4-27 Description of SNMP parameters
Parameter
Description
SNMP Port
The listening port of the software agent in the device.
Read Community,
Write Community
The read and write community string that the software agent
supports.
You can enter number, letter, underline and dash to form the name.
Trap Address
The target address of the Trap information sent by the software agent
in the device.
Trap Port
The target port of the Trap information sent by the software agent in
the device.
Read-only
Username
Set the read-only username accessing device, and it is public by
default.
You can enter number, letter, and underline to form the name.
Read/Write
Username
Set the read/write username access device, and it is public by
default.
You can enter number, letter, and underline to form the name.
Authentication Type
You can select from MD5 and SHA. The default type is MD5.
Authentication
Password
It should be no less than 8 digits.
Encryption Type
The default is CBC-DES.
Encryption
Password
It should be no less than 8 digits.
Click Save.
Step 3
Verification
View device configuration through MIB Builder or MG-SOFT MIB Browser.
Step 1 Run MIB Builder and MG-SOFT MIB Browser.
Compile the two MIB files with MIB Builder. Step 2
Load the generated modules with MG-SOFT MIB Browser. Step 3
Enter the IP address of the device you need to manage in the MG-SOFT MIB Browser, Step 4
and then select version to search.
Unfold all the tree lists displayed in the MG-SOFT MIB Browser, and then you can view
Step 5
the configuration information, video channel amount, audio channel amount, and
software version.