User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Configuration Flow
- 3 Device Initialization
- 4 Basic Configuration
- 4.1 Login
- 4.2 Live
- 4.3 PTZ Operation
- 4.4 Playback
- 4.5 Camera
- 4.5.1 Conditions
- 4.5.2 Setting Video Parameters
- 4.5.2.1 Video
- 4.5.2.2 Snapshot
- 4.5.2.3 Overlay
- 4.5.2.3.1 Configuring Privacy Masking
- 4.5.2.3.2 Configuring Channel Title
- 4.5.2.3.3 Configuring Time Title
- 4.5.2.3.4 Configure Text Overlay
- 4.5.2.3.5 Configure Font Attribute
- 4.5.2.3.6 Configure Picture Overlay
- 4.5.2.3.7 Configure Custom Overlay
- 4.5.2.3.8 Configuring OSD Info
- 4.5.2.3.9 Configuring Counting
- 4.5.2.3.10 Configuring Structured Statistics
- 4.5.2.3.11 Configuring Ranging
- 4.5.2.3.12 Configuring ANPR
- 4.5.2.3.13 Configuring Face Statistics
- 4.5.2.4 ROI
- 4.5.2.5 Path
- 4.5.3 Audio
- 4.6 Network
- 4.7 Storage
- 4.8 System
- 5 Event
- 5.1 Setting Alarm Linkage
- 5.2 Setting Smart Track
- 5.3 Setting Panoramic Calibration
- 5.4 Setting Video Detection
- 5.5 Setting Smart Motion Detection
- 5.6 Setting Audio Detection
- 5.7 Setting Smart Plan
- 5.8 Setting IVS
- 5.9 Setting Crowd Map
- 5.10 Setting Face Recognition
- 5.11 Setting Face Detection
- 5.12 Setting People Counting
- 5.13 Setting Heat Map
- 5.14 Setting Stereo Analysis
- 5.15 Setting ANPR
- 5.16 Setting Video Structuralization
- 5.17 Setting Relay-in
- 5.18 Setting Abnormality
- 6 Maintenance
- Appendix 1 Cybersecurity Recommendations
User’s Manual
1
1 Overview
Introduction 1.1
IP camera (Internet Protocol camera), is a type of digital video camera that receives control
data and sends image data through internet. They are commonly used for surveillance,
requiring no local recording device, but only a local area network.
IP camera is divided into single-channel camera and multi-channel camera according to the
channel quantity. For multi-channel camera, you can set the parameters for each channel.
Network Connection 1.2
In the general IPC network topology, IPC is connected to PC through network switch or router.
See Figure 1-1.
General IPC network Figure 1-1
Get IP address by searching on ConfigTool, and then you can start accessing IPC through
network.
Function 1.3
Functions might vary with different devices, and the actual product shall prevail.
1.3.1 Basic Function
Real-time Monitoring
Live view.
When live viewing the image, you can enable audio, voice talk and connect monitoring
center for quick processing on the abnormality.
Adjust the image to the proper position by PTZ.
Snapshot and triple snapshot abnormality of the monitoring image for subsequent view
and processing.