User's Manual

User’s Manual
80
Table 4-26 Description of major mailbox configuration
Mailbox
SMTP server
Authen
tication
Port
Description
QQ
smtp.qq.com
SSL
465
 The authentication type cannot be
None.
 You need to enable SMTP service in
your mailbox.
 The authentication code is required,
the QQ password or email password
is not applicable.
Authentication code: The code you receive
when enabling SMTP service.
TLS
587
163
smtp.163.com
SSL
465/994
 You need to enable SMTP service in
your mailbox.
 The authentication code is required;
the email password is not applicable.
Authentication code: the code you receive
when enabling SMTP service.
TLS
25
none
25
Sina
smtp.sina.co
m
SSL
465
Enable SMTP service in your mailbox.
none
25
126
smtp.126.com
none
25
Enable SMTP service in your mailbox.
Click Save. Step 3
Click Test to test whether the emails can be sent and received successfully. Step 4
4.6.6 UPnP
UPnP (Universal Plug and Play), a protocol that establishes mapping relation between local
area and wide area networks. This function enables you to visit local area device through wide
area IP address.
Preparation
 Make sure the UPnP service is installed in the system.
 Log in the router, and configure WAN IP address to set up internet connection.
 Enable UPnP in the router.
 Connect your device to the LAN port of the router.
 Select Setting > Network > TCP/IP, in IP Address, enter the local area IP address of the
router or select DHCP and acquires IP address automatically.