User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Configuration Flow
- 3 Device Initialization
- 4 Basic Configuration
- 4.1 Login
- 4.2 Live
- 4.3 PTZ Operation
- 4.4 Playback
- 4.5 Camera
- 4.5.1 Conditions
- 4.5.2 Setting Video Parameters
- 4.5.2.1 Video
- 4.5.2.2 Snapshot
- 4.5.2.3 Overlay
- 4.5.2.3.1 Configuring Privacy Masking
- 4.5.2.3.2 Configuring Channel Title
- 4.5.2.3.3 Configuring Time Title
- 4.5.2.3.4 Configure Text Overlay
- 4.5.2.3.5 Configure Font Attribute
- 4.5.2.3.6 Configure Picture Overlay
- 4.5.2.3.7 Configure Custom Overlay
- 4.5.2.3.8 Configuring OSD Info
- 4.5.2.3.9 Configuring Counting
- 4.5.2.3.10 Configuring Structured Statistics
- 4.5.2.3.11 Configuring Ranging
- 4.5.2.3.12 Configuring ANPR
- 4.5.2.3.13 Configuring Face Statistics
- 4.5.2.4 ROI
- 4.5.2.5 Path
- 4.5.3 Audio
- 4.6 Network
- 4.7 Storage
- 4.8 System
- 5 Event
- 5.1 Setting Alarm Linkage
- 5.2 Setting Smart Track
- 5.3 Setting Panoramic Calibration
- 5.4 Setting Video Detection
- 5.5 Setting Smart Motion Detection
- 5.6 Setting Audio Detection
- 5.7 Setting Smart Plan
- 5.8 Setting IVS
- 5.9 Setting Crowd Map
- 5.10 Setting Face Recognition
- 5.11 Setting Face Detection
- 5.12 Setting People Counting
- 5.13 Setting Heat Map
- 5.14 Setting Stereo Analysis
- 5.15 Setting ANPR
- 5.16 Setting Video Structuralization
- 5.17 Setting Relay-in
- 5.18 Setting Abnormality
- 6 Maintenance
- Appendix 1 Cybersecurity Recommendations
User’s Manual
65
OSD info Figure 4-57
Step 2 Configure OSD information. See Table 4-19.
Table 4-19 Description of OSD information
Parameter
Description
Preset
Select Enable, and the preset name is diaplayed in the image when the
camera turns to the preset, and it will disappear 3 s later.
Temperature
Select Enable and the internal temperature of the current device is
displayed.
Coordinates
Select Enable and the PTZ coordinates info is diaplayed in the image.
Zoom
Select Enable and the zoom info is displayed in the image. such as
, which means 12x zoom rate.
North
Select Enable and the north direction is displayed in the image.
RS485
Select Enable and it will enable RS-485 communication function.
Text
Select Enable and set text, and the text is displayed in the image.
Input Text
Text Align
Alignment mode of the displayed information in the image.
Step 3 Move the OSD box to the position you want in the image.
Step 4 Click Save.
4.5.2.3.9 Configuring Counting
The image displays statistics of the enter number and leave number. When the overlay function
is enabled during intelligent rules configuration, this function is enabled simultaneously.
Select Setting > Camera > Video > Overlay > Counting. Step 1
The Counting interface is displayed. See Figure 4-58.