User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Configuration Flow
- 3 Device Initialization
- 4 Basic Configuration
- 4.1 Login
- 4.2 Live
- 4.3 PTZ Operation
- 4.4 Playback
- 4.5 Camera
- 4.5.1 Conditions
- 4.5.2 Setting Video Parameters
- 4.5.2.1 Video
- 4.5.2.2 Snapshot
- 4.5.2.3 Overlay
- 4.5.2.3.1 Configuring Privacy Masking
- 4.5.2.3.2 Configuring Channel Title
- 4.5.2.3.3 Configuring Time Title
- 4.5.2.3.4 Configure Text Overlay
- 4.5.2.3.5 Configure Font Attribute
- 4.5.2.3.6 Configure Picture Overlay
- 4.5.2.3.7 Configure Custom Overlay
- 4.5.2.3.8 Configuring OSD Info
- 4.5.2.3.9 Configuring Counting
- 4.5.2.3.10 Configuring Structured Statistics
- 4.5.2.3.11 Configuring Ranging
- 4.5.2.3.12 Configuring ANPR
- 4.5.2.3.13 Configuring Face Statistics
- 4.5.2.4 ROI
- 4.5.2.5 Path
- 4.5.3 Audio
- 4.6 Network
- 4.7 Storage
- 4.8 System
- 5 Event
- 5.1 Setting Alarm Linkage
- 5.2 Setting Smart Track
- 5.3 Setting Panoramic Calibration
- 5.4 Setting Video Detection
- 5.5 Setting Smart Motion Detection
- 5.6 Setting Audio Detection
- 5.7 Setting Smart Plan
- 5.8 Setting IVS
- 5.9 Setting Crowd Map
- 5.10 Setting Face Recognition
- 5.11 Setting Face Detection
- 5.12 Setting People Counting
- 5.13 Setting Heat Map
- 5.14 Setting Stereo Analysis
- 5.15 Setting ANPR
- 5.16 Setting Video Structuralization
- 5.17 Setting Relay-in
- 5.18 Setting Abnormality
- 6 Maintenance
- Appendix 1 Cybersecurity Recommendations
User’s Manual
47
Parameter
Description
Mode
Device exposure modes.
Auto: Adjusts the image brightness according to the actual condition
automatically.
Gain Priority: When the exposure range is normal, the system
prefers the configured gain range when auto adjusting according to
the ambient lighting condition. If the image brightness is not enough
and the gain has reached upper or lower limit, the system adjusts
shutter value automatically to ensure the image at ideal brightness.
You can configure gain range to adjust gain level when using gain
priority mode.
Shutter priority: When the exposure range is normal, the system
prefers the configured shutter range when auto adjusting according
to the ambient lighting condition. If the image brightness is not
enough and the shutter value has reached upper or lower limit, the
system adjusts gain value automatically to ensure the image at ideal
brightness.
Iris priority: The iris value is set to a fixed value, and the device
adjusts shutter value then. If the image brightness is not enough and
the shutter value has reached upper or lower limit, the system
adjusts gain value automatically to ensure the image at ideal
brightness.
Manual: Configure gain and shutter value manually to adjust image
brightness.
When the Anti-flicker is set to Outdoor, you can select Gain priority or
Shutter priority in the Mode list.
Exposure Comp
Sets the value, and it ranges from 0 to 50. The higher the value is, the
brighter the image will be.
Shutter
Set the effective exposure time. The smaller the value, the shorter the
exposure time will be.
Shutter range
When selecting Shutter Priority or Manual in Mode, and setting
Customized Range in Shutter, you can set shutter range, and the unit
is ms.
Gain
When selecting Gain Priority or Manual in Mode, you can set shutter
range. With minimum illumination, the camera increases Gain
automatically to get clearer images.
Iris
When selecting Aperture Priority in Mode, you can set iris range.