User's Manual

Table Of Contents
User’s Manual
30
Time task Figure 4-17
Select the Enable check box to enable time task function. Step 2
Select the time task number. Step 3
Select the time task action.
Step 4
You need to select the corresponding action number for some selected time task
actions.
Set the auto home time in AutoHome. Step 5
AutoHome: When you call PTZ, the time task will be interrupted. After setting
AutoHome time, the camera will resume the time task automatically.
Click Period setting to set the time of the task, and then click Save. Step 6
For setting arm time, see "5.1.1.1 Setting Period."
Click Save. Step 7
Other Operations
You can copy the configurations of existing task number to other task number.
Select the existing task number in Time Task num. Step 1
Select the task number to be configured in Copy To Task No. Step 2
Click Copy. Step 3
Click Save. Step 4
4.3.2.11 PTZ Restart
This function can restart the PTZ camera.
Select Setting > PTZ settings > Function > PTZ Restart. Step 1
The PTZ Restart interface is displayed. See Figure 4-18.