User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Configuration Flow
- 3 Device Initialization
- 4 Basic Configuration
- 4.1 Login
- 4.2 Live
- 4.3 PTZ Operation
- 4.4 Playback
- 4.5 Camera
- 4.5.1 Conditions
- 4.5.2 Setting Video Parameters
- 4.5.2.1 Video
- 4.5.2.2 Snapshot
- 4.5.2.3 Overlay
- 4.5.2.3.1 Configuring Privacy Masking
- 4.5.2.3.2 Configuring Channel Title
- 4.5.2.3.3 Configuring Time Title
- 4.5.2.3.4 Configure Text Overlay
- 4.5.2.3.5 Configure Font Attribute
- 4.5.2.3.6 Configure Picture Overlay
- 4.5.2.3.7 Configure Custom Overlay
- 4.5.2.3.8 Configuring OSD Info
- 4.5.2.3.9 Configuring Counting
- 4.5.2.3.10 Configuring Structured Statistics
- 4.5.2.3.11 Configuring Ranging
- 4.5.2.3.12 Configuring ANPR
- 4.5.2.3.13 Configuring Face Statistics
- 4.5.2.4 ROI
- 4.5.2.5 Path
- 4.5.3 Audio
- 4.6 Network
- 4.7 Storage
- 4.8 System
- 5 Event
- 5.1 Setting Alarm Linkage
- 5.2 Setting Smart Track
- 5.3 Setting Panoramic Calibration
- 5.4 Setting Video Detection
- 5.5 Setting Smart Motion Detection
- 5.6 Setting Audio Detection
- 5.7 Setting Smart Plan
- 5.8 Setting IVS
- 5.9 Setting Crowd Map
- 5.10 Setting Face Recognition
- 5.11 Setting Face Detection
- 5.12 Setting People Counting
- 5.13 Setting Heat Map
- 5.14 Setting Stereo Analysis
- 5.15 Setting ANPR
- 5.16 Setting Video Structuralization
- 5.17 Setting Relay-in
- 5.18 Setting Abnormality
- 6 Maintenance
- Appendix 1 Cybersecurity Recommendations
User’s Manual
20
Parameter
Description
Cylinder
Display the distortion panorama in 360°circularity.
You can drag the image in upper/lower/left/right
direction. Press I to display the panorama, and
press O to return to the orignal size.
Press S to rotate the image in anticlockwise
direction, and press E to stop the rotation.
Scroll the mouse wheel to zoom the image.
Asteroid
You can drag the image in upper/lower/left/right
direction. Press I to display the panorama, and
press O to return to the orignal size.
Press the left mouse-button to slide down to
display the image on the plane surface.
Scroll the mouse wheel to zoom the image.
PTZ Operation 4.3
This section introduces PTZ parameter configuration, PTZ control and PTZ function
configuration.
4.3.1 Configuring External PTZ Protocol
You need to configure PTZ protocol when accessing external PTZ; otherwise the camera
cannot control external PTZ.
Preparation
Access external PTZ through RS-485.
You have configured the parameters of serial port. For details, see "4.8.6.1 Serial Port
Settings."
Procedure
Select Setting > PTZ Setting > Protocol. Step 1
The PTZ Setting interface is displayed. See Figure 4-7.
PTZ setting Figure 4-7