User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Configuration Flow
- 3 Device Initialization
- 4 Basic Configuration
- 4.1 Login
- 4.2 Live
- 4.3 PTZ Operation
- 4.4 Playback
- 4.5 Camera
- 4.5.1 Conditions
- 4.5.2 Setting Video Parameters
- 4.5.2.1 Video
- 4.5.2.2 Snapshot
- 4.5.2.3 Overlay
- 4.5.2.3.1 Configuring Privacy Masking
- 4.5.2.3.2 Configuring Channel Title
- 4.5.2.3.3 Configuring Time Title
- 4.5.2.3.4 Configure Text Overlay
- 4.5.2.3.5 Configure Font Attribute
- 4.5.2.3.6 Configure Picture Overlay
- 4.5.2.3.7 Configure Custom Overlay
- 4.5.2.3.8 Configuring OSD Info
- 4.5.2.3.9 Configuring Counting
- 4.5.2.3.10 Configuring Structured Statistics
- 4.5.2.3.11 Configuring Ranging
- 4.5.2.3.12 Configuring ANPR
- 4.5.2.3.13 Configuring Face Statistics
- 4.5.2.4 ROI
- 4.5.2.5 Path
- 4.5.3 Audio
- 4.6 Network
- 4.7 Storage
- 4.8 System
- 5 Event
- 5.1 Setting Alarm Linkage
- 5.2 Setting Smart Track
- 5.3 Setting Panoramic Calibration
- 5.4 Setting Video Detection
- 5.5 Setting Smart Motion Detection
- 5.6 Setting Audio Detection
- 5.7 Setting Smart Plan
- 5.8 Setting IVS
- 5.9 Setting Crowd Map
- 5.10 Setting Face Recognition
- 5.11 Setting Face Detection
- 5.12 Setting People Counting
- 5.13 Setting Heat Map
- 5.14 Setting Stereo Analysis
- 5.15 Setting ANPR
- 5.16 Setting Video Structuralization
- 5.17 Setting Relay-in
- 5.18 Setting Abnormality
- 6 Maintenance
- Appendix 1 Cybersecurity Recommendations
User’s Manual
194
Log Figure 6-10
Configure Start Time and End Time, and then select the log type. Step 2
The start time should be later than January 1st, 2000, and the end time should be
earlier than December 31, 2037.
The log type includes All, System, Setting, Data, Event, Record, Account, and Safety.
System: Includes program start, abnormal close, close, program reboot, device
closedown, device reboot, system reboot, and system upgrade.
Setting: Includes saving configuration and deleting configuration file.
Data: Includes configuring disk type, clearing data, hot swap, FTP state, and
record mode.
Event (records events such as video detection, smart plan, alarm and abnormality):
includes event start and event end.
Record: Includes file access, file access error, and file search.
Account: Includes login, logout, adding user, deleting user, modifying user, adding
group, deleting group, and modifying group.
Safety: Includes password resetting and IP filter.
Click Search. Step 3
The searched results are displayed. See Figure 6-11.
Click a certain log, and then you can view the detailed information in Detailed
Information area.
Click Backup, and then you can back up all found logs to local PC.