User's Manual

Table Of Contents
User’s Manual
173
Procedure
This section takes Fall Detection as an example to introduce the configuration of stereo
analysis rule.
Select Setting > Event > Stereo Analysis > Stereo Analysis. Step 1
The Stereo Analysis interface is displayed.
Click , double-click the name to modify the rule name, and then select People Step 2
Approaching Detection as Rule Typ. See Figure 5-62.
People approaching detection
Figure 5-62
(Optional) Click Clear to delete the default rule box, and then click Draw Rule to draw a Step 3
detection area in the image.
When selecting People No. Error for a recording device, draw the front of a
classroom as the detection area.
When selecting Stand Detection for a recording device, draw the area where the
students stay as the detection area.
For other devices without special requirements, use the default box of the system
(draw the full screen as the detection area).
Set parameters. See Table 5-20. Step 4
Parameters for recording device and common device are different. The actual interface
shall prevail.