User's Manual

Table Of Contents
User’s Manual
165
5.12.2 Queuing
The system counts the queue people in the detection area. When the queue people number
exceeds the configured number or the queue time exceeds the configured time, the alarm is
triggered, and the system performs an alarm linkage.
Preparation
Select Setting > Event > Smart Plan, and then enable People Counting.
Procedure
Select Setting > Event > Queuing. Step 1
The Queuing interface is displayed. See Figure 5-55.
Queuing Figure 5-55
Click to add the queuing function. Step 2
You can add 4 rules at most.
Double-click the name to modify the rule name. Click Draw Rule to draw a detection Step 3
area in the image, and right-click to complete the drawing.
Set parameters. See Table 5-16. Step 4