User's Manual

Table Of Contents
User’s Manual
145
Face detection Figure 5-28
Select the Enable check box to enable the face detection function. Step 2
(Optional) Click Draw next to Detect Region to draw a face detection area in the Step 3
image.
(Optional) Click Draw next to Exclude Region to draw a non-face detection area in the Step 4
Detect Region.
(Optional) Select Max Size or Min Size, click Draw Target at the right side of Target Step 5
filter, and then draw the target in the image.
Set parameters. See Table 5-10. Step 6
Table 5-10 Description of face detection parameters
Parameter
Description
OSD
Select the OSD check box, and the number of people with face detected
and recognized is displayed on the Live interface.
Click Reset to recount.
Face
Enhancement
Select the Face Enhancement check box to preferably guarantee clear
face with low stream.
Non-living
Filtering
Filter non-living faces in the image, such as a face picture.
Snap Face
Image
Set a range for snapping face image, including face picture and one-inch
picture.