User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Configuration Flow
- 3 Device Initialization
- 4 Basic Configuration
- 4.1 Login
- 4.2 Live
- 4.3 PTZ Operation
- 4.4 Playback
- 4.5 Camera
- 4.5.1 Conditions
- 4.5.2 Setting Video Parameters
- 4.5.2.1 Video
- 4.5.2.2 Snapshot
- 4.5.2.3 Overlay
- 4.5.2.3.1 Configuring Privacy Masking
- 4.5.2.3.2 Configuring Channel Title
- 4.5.2.3.3 Configuring Time Title
- 4.5.2.3.4 Configure Text Overlay
- 4.5.2.3.5 Configure Font Attribute
- 4.5.2.3.6 Configure Picture Overlay
- 4.5.2.3.7 Configure Custom Overlay
- 4.5.2.3.8 Configuring OSD Info
- 4.5.2.3.9 Configuring Counting
- 4.5.2.3.10 Configuring Structured Statistics
- 4.5.2.3.11 Configuring Ranging
- 4.5.2.3.12 Configuring ANPR
- 4.5.2.3.13 Configuring Face Statistics
- 4.5.2.4 ROI
- 4.5.2.5 Path
- 4.5.3 Audio
- 4.6 Network
- 4.7 Storage
- 4.8 System
- 5 Event
- 5.1 Setting Alarm Linkage
- 5.2 Setting Smart Track
- 5.3 Setting Panoramic Calibration
- 5.4 Setting Video Detection
- 5.5 Setting Smart Motion Detection
- 5.6 Setting Audio Detection
- 5.7 Setting Smart Plan
- 5.8 Setting IVS
- 5.9 Setting Crowd Map
- 5.10 Setting Face Recognition
- 5.11 Setting Face Detection
- 5.12 Setting People Counting
- 5.13 Setting Heat Map
- 5.14 Setting Stereo Analysis
- 5.15 Setting ANPR
- 5.16 Setting Video Structuralization
- 5.17 Setting Relay-in
- 5.18 Setting Abnormality
- 6 Maintenance
- Appendix 1 Cybersecurity Recommendations
User’s Manual
139
Table 5-8 Description of IVS parameters
Parameter
Description
Direction
Set the direction of rule detection.
When setting cross fence detection and tripwire, select A->B, B->A or
A<->B
When setting intrusion, select Enters, Exits, or Enter&Exit.
Action
When setting intrusion action, select Appears or Cross.
Object
tracking
Select Object Tracking to enable this function. When alarm is triggered by
a moving object, select 1P+3 or 1P+5 as the object tracking display mode in
the Live interface. Then the tracking scene follows the moving object until
the object is out of the camera range. For details, see "4.2.4 Window
Adjustment Bar."
This function is available on some select models.
Track linkage
Select Alarm Track and set the tracking time. When alarm is triggered, the
camera automatically tracks the person or object that triggers the alarm.
Tracking time is the duration that the camera automatically tracks the
object.
Before enabling this function, you need to enable or disable the Alarm
Track function under Smart Track as needed.
When the Channel is set as 1, disable Alarm Track under Smart
Track.
When the Channel is set as 2 or 3, enable Alarm Track under Smart
Track.
Track Time
AI
Recognition
Select AI Recognition to enable this function.
When you select Person as the alarm target, an alarm will be triggered
when the system detects that persons trigger the rule.
When you select Vehicle as the alarm target, alarm will be triggered
when the system detects that vehicle trigger the rule.
Duration
For abandoned object, the duration is the shortest time for triggering an
alarm after an object is abandoned.
For missing object, the duration is the shortest time for triggering an
alarm after an object is missing.
For parking detection, crowd gathering, or loitering detection, the
duration is the shortest time for triggering an alarm after an object
appears in the area.
Sensitivity
For fast moving, sensitivity is related to the triggering speed. Lower
sensitivity requires faster moving speed to trigger the alarm.
For crowd gathering, sensitivity is related to the alarm triggering time. It
is easier to trigger the alarm with higher sensitivity.
Set arming periods and alarm linkage action. For details, see "5.1.1 Alarm Linkage." Step 6
Click Save. Step 7