User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Configuration Flow
- 3 Device Initialization
- 4 Basic Configuration
- 4.1 Login
- 4.2 Live
- 4.3 PTZ Operation
- 4.4 Playback
- 4.5 Camera
- 4.5.1 Conditions
- 4.5.2 Setting Video Parameters
- 4.5.2.1 Video
- 4.5.2.2 Snapshot
- 4.5.2.3 Overlay
- 4.5.2.3.1 Configuring Privacy Masking
- 4.5.2.3.2 Configuring Channel Title
- 4.5.2.3.3 Configuring Time Title
- 4.5.2.3.4 Configure Text Overlay
- 4.5.2.3.5 Configure Font Attribute
- 4.5.2.3.6 Configure Picture Overlay
- 4.5.2.3.7 Configure Custom Overlay
- 4.5.2.3.8 Configuring OSD Info
- 4.5.2.3.9 Configuring Counting
- 4.5.2.3.10 Configuring Structured Statistics
- 4.5.2.3.11 Configuring Ranging
- 4.5.2.3.12 Configuring ANPR
- 4.5.2.3.13 Configuring Face Statistics
- 4.5.2.4 ROI
- 4.5.2.5 Path
- 4.5.3 Audio
- 4.6 Network
- 4.7 Storage
- 4.8 System
- 5 Event
- 5.1 Setting Alarm Linkage
- 5.2 Setting Smart Track
- 5.3 Setting Panoramic Calibration
- 5.4 Setting Video Detection
- 5.5 Setting Smart Motion Detection
- 5.6 Setting Audio Detection
- 5.7 Setting Smart Plan
- 5.8 Setting IVS
- 5.9 Setting Crowd Map
- 5.10 Setting Face Recognition
- 5.11 Setting Face Detection
- 5.12 Setting People Counting
- 5.13 Setting Heat Map
- 5.14 Setting Stereo Analysis
- 5.15 Setting ANPR
- 5.16 Setting Video Structuralization
- 5.17 Setting Relay-in
- 5.18 Setting Abnormality
- 6 Maintenance
- Appendix 1 Cybersecurity Recommendations
User’s Manual
137
Rule
Description
Applicable Scene
Crowd
gathering
When the crowd gathers or the crowd
density is large, the system performs
alarm linkages.
Scenes with medium or long distance,
such as outdoor plaza, government
entrance, station entrance and exit. It is
not suitable for short-distance view
analysis.
Loitering
detection
When the target loiters over the
shortest alarm time, the system
performs alarm linkages. After alarm
is triggered, if the target stay in the
area within the time interval of alarm,
then alarm will be triggered again.
Scenes such as park and hall.
Preparation
Select Setting > Event > Smart Plan, and enable IVS.
Select Setting > Event > IVS > Global Setup to finish global configuration, and then
configure Fast Moving rule.
Procedure
Configure IVS rules. This section takes tripwire as an example.
Go to the Rule Config interface of the speed dome, and the PTZ lock function is automatically
enabled. The locking time is 180 seconds. You can only manually control the PTZ during the
locking time. Click Unlock at lower left corner of the Rule Config interface to manually unlock
the PTZ, and click Lock again to relock the PTZ.
Select Setting > Event > IVS > Rule Config. Step 1
The Rule Config interface is displayed.
Click , double-click the name to modify the rule name, and select Tripwire from the Step 2
Rule Type drop-down list. See Figure 5-22.