User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Configuration Flow
- 3 Device Initialization
- 4 Basic Configuration
- 4.1 Login
- 4.2 Live
- 4.3 PTZ Operation
- 4.4 Playback
- 4.5 Camera
- 4.5.1 Conditions
- 4.5.2 Setting Video Parameters
- 4.5.2.1 Video
- 4.5.2.2 Snapshot
- 4.5.2.3 Overlay
- 4.5.2.3.1 Configuring Privacy Masking
- 4.5.2.3.2 Configuring Channel Title
- 4.5.2.3.3 Configuring Time Title
- 4.5.2.3.4 Configure Text Overlay
- 4.5.2.3.5 Configure Font Attribute
- 4.5.2.3.6 Configure Picture Overlay
- 4.5.2.3.7 Configure Custom Overlay
- 4.5.2.3.8 Configuring OSD Info
- 4.5.2.3.9 Configuring Counting
- 4.5.2.3.10 Configuring Structured Statistics
- 4.5.2.3.11 Configuring Ranging
- 4.5.2.3.12 Configuring ANPR
- 4.5.2.3.13 Configuring Face Statistics
- 4.5.2.4 ROI
- 4.5.2.5 Path
- 4.5.3 Audio
- 4.6 Network
- 4.7 Storage
- 4.8 System
- 5 Event
- 5.1 Setting Alarm Linkage
- 5.2 Setting Smart Track
- 5.3 Setting Panoramic Calibration
- 5.4 Setting Video Detection
- 5.5 Setting Smart Motion Detection
- 5.6 Setting Audio Detection
- 5.7 Setting Smart Plan
- 5.8 Setting IVS
- 5.9 Setting Crowd Map
- 5.10 Setting Face Recognition
- 5.11 Setting Face Detection
- 5.12 Setting People Counting
- 5.13 Setting Heat Map
- 5.14 Setting Stereo Analysis
- 5.15 Setting ANPR
- 5.16 Setting Video Structuralization
- 5.17 Setting Relay-in
- 5.18 Setting Abnormality
- 6 Maintenance
- Appendix 1 Cybersecurity Recommendations
User’s Manual
136
Verification
Select the verification type, and then click Calibration Valid. Step 1
To verify vertical ruler and horizontal ruler, respectively select Height Verification and
Width Verification.
Draw a straight line in the image to verify whether the rulers are correctly set. Step 2
In case of big difference between the estimated value and the actual one, fine-tune or
reset parameters until the error requirement is met.
5.8.2 Rule Configuration
Set rules for IVS, including cross fence detection, tripwire, intrusion, abandoned object, moving
object, fast moving, parking detection, crowd gathering, and loitering detection.
For the functions and applications of the rules, see Table 5-6.
Table 5-6 Description of IVS functions
Rule
Description
Applicable Scene
Tripwire
When the target crosses tripwire from
the defined motion direction, the
system performs alarm linkages.
Scenes with sparse targets and no
occlusion among targets, such as the
perimeter protection of unattended area.
Intrusion
When the target enters, leaves, or
appears in the detection area, the
system performs alarm linkages.
Abandon
ed object
When an object is abandoned in the
detection area over the set time, the
system performs alarm linkages.
Scenes with sparse targets and without
obvious and frequent light change.
Simple scene in the detection area is
recommended.
Missed alarm might increase in the
scenes with dense targets, frequent
occlusion, and people staying.
In scenes with complex foreground
and background, false alarm might
be triggered for abandoned or
missing object.
Missing
object
When an object is taken out of the
detection area over the defined time,
the system performs alarm linkages.
Fast
moving
When the motion speed is higher
than the configured speed, the
system performs alarm linkages.
Scene with sparse targets and less
occlusion. The camera should be
installed right above the monitoring
area. The light direction should be
vertical to the motion direction.
Parking
detection
When the target stays over the
configured time, the system performs
alarm linkages.
Road monitoring and traffic
management.