User's Manual

User’s Manual
125
Table 5-3 Description of alarm track parameters
Parameter
Description
Auto Track
Select On, the speed dome would automatically links to a corresponding
position and tracks an object when the intelligent rules of the panoramic
camera trigger alarms.
Track Time
Set the alarm track time.
Before an object disappears: The speed dome would automatically

links to a corresponding position and tracks an object until the object
moves out of the monitoring range when the intelligent rules of the
panoramic camera trigger alarms.
Custom: Set the auto alarm track time of the speed dome.

Idle Time
It is an interval from the end of alarm track of the speed dome to the start of
idle mode.
Set Idle Time and Idle Position. If no event needs to be tracked after the
configured idle time, the device automatically rotates to the set idle position.
For example, the Idle Time is set to be five seconds and the Idle Position
is set to be preset point 1. When the speed dome does not start tracking
after five seconds, it automatically rotates to preset point 1.
To set Idle Position, first set a preset point. For preset point, see "4.3.2.1
Preset."
Idle Position
Click Save. Step 4
Setting Panoramic Calibration 5.3
The device has calibration parameters by default, and you can modify the parameters manually
when the effect is not good with default setting. Before manually calibrating a channel, clear all
default calibration parameters.
Channel 1 is PTZ camera. You should calibrate the scene coordinates of Channel 1 and other
channels. Take Channel 2 as an example.
Select Setting > Event > Panoramic Calibration. Step 1
The Panoramic Calibration interface is displayed. See Figure 5-13.