User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Configuration Flow
- 3 Device Initialization
- 4 Basic Configuration
- 4.1 Login
- 4.2 Live
- 4.3 PTZ Operation
- 4.4 Playback
- 4.5 Camera
- 4.5.1 Conditions
- 4.5.2 Setting Video Parameters
- 4.5.2.1 Video
- 4.5.2.2 Snapshot
- 4.5.2.3 Overlay
- 4.5.2.3.1 Configuring Privacy Masking
- 4.5.2.3.2 Configuring Channel Title
- 4.5.2.3.3 Configuring Time Title
- 4.5.2.3.4 Configure Text Overlay
- 4.5.2.3.5 Configure Font Attribute
- 4.5.2.3.6 Configure Picture Overlay
- 4.5.2.3.7 Configure Custom Overlay
- 4.5.2.3.8 Configuring OSD Info
- 4.5.2.3.9 Configuring Counting
- 4.5.2.3.10 Configuring Structured Statistics
- 4.5.2.3.11 Configuring Ranging
- 4.5.2.3.12 Configuring ANPR
- 4.5.2.3.13 Configuring Face Statistics
- 4.5.2.4 ROI
- 4.5.2.5 Path
- 4.5.3 Audio
- 4.6 Network
- 4.7 Storage
- 4.8 System
- 5 Event
- 5.1 Setting Alarm Linkage
- 5.2 Setting Smart Track
- 5.3 Setting Panoramic Calibration
- 5.4 Setting Video Detection
- 5.5 Setting Smart Motion Detection
- 5.6 Setting Audio Detection
- 5.7 Setting Smart Plan
- 5.8 Setting IVS
- 5.9 Setting Crowd Map
- 5.10 Setting Face Recognition
- 5.11 Setting Face Detection
- 5.12 Setting People Counting
- 5.13 Setting Heat Map
- 5.14 Setting Stereo Analysis
- 5.15 Setting ANPR
- 5.16 Setting Video Structuralization
- 5.17 Setting Relay-in
- 5.18 Setting Abnormality
- 6 Maintenance
- Appendix 1 Cybersecurity Recommendations
User’s Manual
120
5.1.1.5 Email Linkage
When an alarm is triggered, the system will automatically send an email to users.
Email linkage takes effect only when SMTP is configured. For details, see "4.6.5 SMTP
(Email)."
Email linkage Figure 5-5
5.1.1.6 PTZ Linkage
When an alarm is triggered, the system links PTZ to do some operations. For example, the
system links PTZ to rotate to the preset X.
PTZ linkage Figure 5-6
5.1.1.7 White Light Linkage
When an alarm is triggered, the system can automatically enable the white light.
Set Mode, Duration, Flicker Frequency, Duration, and Period.
Mode: The display mode of the white light when an alarm is triggered. It includes Normally
on and Flicker. When set flicker as the mode, you need to set the flicker frequency.
Duration: After setting white light duration, the white light is turned off after an extended
time of period after an alarm. It is 5 seconds–30 seconds.
Period: The period for using white light. When an alarm triggered during the configured
period, the system links white light. For the configuration, see "5.1.1.1 Setting Period."
White light linkage Figure 5-7
5.1.1.8 Audio Linkage
The system broadcasts alarm audio file when an alarm event occurs. Select Setting > Camera >
Audio > Alarm Audio to set alarm audio file.