User's Manual

User’s Manual
113
Wiper Figure 4-113
Configure wiper work mode. For details, see Table 4-43. Step 2
Table 4-43 Description of wiper parameters
Parameter
Description
Interval Time
The interval time between stop mode and start mode. For
example, set the time to10 s, and the wiper will work every 10 s.
Sart
Set the work status of the wiper.
Start: Click Start, and the wiper works as the set interval

time.
Stop: Click Stop, and the wiper stops working.

Once: Click Once, and the wiper works once.

Stop
Once
Time Wash
Select the Time Wash check box and set the time, and then the
wiper will work as the set time. Click Once, and the wiper works
once. It can be used to check whether the wiper can work
normally.
Click Save. Step 3