User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Configuration Flow
- 3 Device Initialization
- 4 Basic Configuration
- 4.1 Login
- 4.2 Live
- 4.3 PTZ Operation
- 4.4 Playback
- 4.5 Camera
- 4.5.1 Conditions
- 4.5.2 Setting Video Parameters
- 4.5.2.1 Video
- 4.5.2.2 Snapshot
- 4.5.2.3 Overlay
- 4.5.2.3.1 Configuring Privacy Masking
- 4.5.2.3.2 Configuring Channel Title
- 4.5.2.3.3 Configuring Time Title
- 4.5.2.3.4 Configure Text Overlay
- 4.5.2.3.5 Configure Font Attribute
- 4.5.2.3.6 Configure Picture Overlay
- 4.5.2.3.7 Configure Custom Overlay
- 4.5.2.3.8 Configuring OSD Info
- 4.5.2.3.9 Configuring Counting
- 4.5.2.3.10 Configuring Structured Statistics
- 4.5.2.3.11 Configuring Ranging
- 4.5.2.3.12 Configuring ANPR
- 4.5.2.3.13 Configuring Face Statistics
- 4.5.2.4 ROI
- 4.5.2.5 Path
- 4.5.3 Audio
- 4.6 Network
- 4.7 Storage
- 4.8 System
- 5 Event
- 5.1 Setting Alarm Linkage
- 5.2 Setting Smart Track
- 5.3 Setting Panoramic Calibration
- 5.4 Setting Video Detection
- 5.5 Setting Smart Motion Detection
- 5.6 Setting Audio Detection
- 5.7 Setting Smart Plan
- 5.8 Setting IVS
- 5.9 Setting Crowd Map
- 5.10 Setting Face Recognition
- 5.11 Setting Face Detection
- 5.12 Setting People Counting
- 5.13 Setting Heat Map
- 5.14 Setting Stereo Analysis
- 5.15 Setting ANPR
- 5.16 Setting Video Structuralization
- 5.17 Setting Relay-in
- 5.18 Setting Abnormality
- 6 Maintenance
- Appendix 1 Cybersecurity Recommendations
User’s Manual
100
Parameter
Description
Restricted Login
Set the PC address that allows the defined user to log in to the camera
and the validity period and time range. You can log in to web with the
defined IP in the defined time range of validity period.
IP address: You can log in to web through the PC with the set IP.
Validity period: You can log in to web in the set validity period.
Time Range: You can log in to web in the set time range.
Set as following:
1. Select IP Address: Select IP type and set IP address.
IP Address: Enter the IP address of the host to be added.
IP segment: Enter the start address and end address of the host
to be added.
2. Select Validity Period: Set the begin time and end time.
3. Select Time Range: Set the time range that allow user to log in. For
details, see "5.1.1.1 Setting Period."
Click Save. Step 4
The newly added user is displayed in the user name list.
After adding user, click to modify password, group, memo or authorities;
click to delete the added users. Admin user cannot be deleted.
Click in the admin row to modify its username and email address.
4.8.4.2 Adding User Group
You have two groups named admin and user by default, and you can add new group, delete
added group or modify group authority and memo.
Select Setting > System > Account > Account > Group Name. Step 1
The Group Name interface is displayed. See Figure 4-95.