User's Manual

User’s Manual
97
4.8.4 Account
Manage all the users. You can add, delete, or modify users. Users include admin, added users
and ONVIF users.
Managing users and groups are only available for administrator users.
 The max length of the user or group name is 31 characters which consisted of number,
letters, underline, dash, dot and @.
 The password must consist of 8 to 32 non-blank characters and contain at least two types
of characters among upper case, lower case, number, and special character (excluding '
" ; : &).
 You can have 18 users and 8 groups at most.
 You can manage users through single user or group, and duplicate user names or group
names are not allowed. A user can be in only one group at a time, and the group users can
own authorities within group authority range.
 Online users cannot modify their own authority.
 There is one admin by default which has highest authority.
 Select Anonymous Login, and then log in with only IP address instead of user name and
password. Anonymous users only have preview authorities. During anonymous login, click
Logout, and then you can log in with other username.
4.8.4.1 Adding a User
You are admin user by default. You can add users, and configure different authorities.
Select Setting > System > Account > Account > Username. Step 1
The Username interface is displayed. See Figure 4-92.
Username Figure 4-92
Click Add User. Step 2
The Add User interface is displayed. See Figure 4-93 and Figure 4-94.