User's Manual

User’s Manual
92
Local Figure 4-85
4.7.3.3 FTP
FTP function can be enabled only when it was selected as a destination path. When the
network does not work, you can save all the files to the internal SD card for emergency.
Select Setting > Storage > Destination > FTP. Step 1
The FTP interface is displayed. See Figure 4-86.
FTP Figure 4-86
Select the Enable check box to enable FTP function, and select the FTP type. Step 2
You select FTP or SFPT from the drop-down list. SFTP is recommended to enhance
network security.
Configure FTP parameters. For details, see Table 4-33. Step 3
Table 4-33 Description of FTP parameters
Parameter
Description
Server Address
The IP address of the FTP server.
Port
The port number of the FTP server.
Username
The user name to log in to the FTP server.
Password
The password to log in to the FTP server.
Remote Directory
The destination path in the FTP server.
Emergency
(Local)
Select Emergency (Local), and when the FTP server does not work, all
the files are saved to the internal SD card.