Datasheet

10
100
1000
10000
100000
140 155 170 185 200 215 230
AB DAHRÈNTRÅD, Jonslund, SE-465 80 Nossebro
Phone: +46(0)512 - 300 300, Fax: +46(0)512 - 300 400
[e-mail], www.dahrentrad.se
DASOL
Round enamelled winding wire of copper, solderable, class 155
Properties specific dimension
Typical test results compared to the IEC standard values
The technical data included is up to date at the time of printing.
Dahréntråd reserve the right to make any amendments deemed necessary.
05.04.11/BF
Dimension
mm
1)
Elongation at
fracture
2)
Electrical breakdown
voltage
% kV
Selection of types IEC
3)
DT IEC
3)
DT
0,200 - Grade 1 21 35 1,8 6,5
0,200 - Grade 2 21 35 3,5 8,5
0,315 - Grade 1 24 40 2,3 7,5
0,315 - Grade 2 24 40 4,4 9,5
0,500 - Grade 1 28 43 2,6 8,5
0,500 - Grade 2 28 43 4,8 10,0
0,630 - Grade 1 32 45 2,7 8,5
0,630 - Grade 2 32 45 5,0 10,0
Comments:
1)
IEC 60851 - 3.2 Percentage elongation at fracture of conductor
2)
IEC 60851 - 5.3 The voltage is measured between a twisted pair of enamelled conductors
3)
DT = Dahréntråd
Increase - Tolerance/mm
Nominal conductor diameter/mm
Dimensions - Tolerances
Temperature index according to IEC 60172
Temperature/°C
Thermal life/h
Tolerances
Grade 2
Tolerances
Grade 1
Conductor
tolerances
-0,020
-0,010
0,000
0,010
0,020
0,030
0,040
0,050
0,060
0,070
0,080
0,090
0,100
0,110
0,200 0,224 0,250 0,280 0,315 0,400 0,500 0,630 0,800 1,000 1,250 1,600