Product Manual

OPERATION

• Turn on both power switches. One is located inside the door and the other is on

the right side of the shredder.Slide open the clear safety shield feed opening door

located at the top of the machine.

• Insert 2.5” or 3.5” Hard Drive into the feed opening.

• Slide the safety shield feed opening door closed.

• Press the START button on the keypad. The punching area will illuminate and

the punching die will drive through the hard drive. After a short delay, the die will

reverse direction automatically and the LED light will go out, indicating the process

is complete.

• Press down the Discharge Handle located on the top of the machine to release the

punched hard drive into the waste container.

REVERSE

• In case of a jam, the machine is designed to automatically operate in reverse.

DOOR OPEN

• The DOOR OPEN will illuminate if the safety shield feed opening door located on

the top of the machine or the cabinet door is open. Both must be closed for the

machine to operate.

FULL

• The FULL LED light will illuminate if the waste container is full. Open the cabinet door,

empty the waste container, replace the waste container, and close the cabinet door.