Product Manual

5
OPERATION
POWER ON
• Turn on both power switches. One is located
inside the door and the other is on the right
side of the shredder.
AUTO START
• Press the START button. The AUTO LED will illu-
minate and the shredder will run for 1 minute.
• AUTO mode switches o after ve (5) minutes
of no activity.
MANUAL MODE
• With the AUTO button illuminated, push the
START button again. The MANUAL LED will
illuminate, and the shredder will begin to run.
Insert media through bypass chute. Press the
START button again to turn o Manual mode.
REVERSE MODE
• Pushing the REV button will illuminate the REV
LED and the shredder will operate in reverse.
Use this function if too much media is inserted
and a jam occurs.
BAG FULL
• When the waste container is full, the FULL
LED will illuminate, and the shredder will stop
automatically. Open the door, remove and
empty the waste container. Replace the waste
container, close the door, and press the START
button to resume shredding.
OPEN
• When the door is open the OPEN LED will
illuminate and the shredder will not operate.
Close the door to resume shredding.