User's Manual

5
OPERATION
POWER ON
• Turn the main power switch ON (located on
the right side of the shredder).
AUTO START/STOP
• Press the START button. The AUTO LED will illu-
minate indicating the shredder is ready for use.
• When in AUTO mode, the shredder will start
and stop automatically when shredding.
• AUTO mode switches o after ve (5) minutes
of no activity.
MANUAL MODE
• With the AUTO button illuminated, push the
START button again. The MANUAL LED will
illuminate, and the shredder will begin to
run. Press the START button again to turn o
Manual mode.
REVERSE MODE
• Pushing the REV button will illuminate the REV
LED and the shredder will operate in reverse. If
too much paper is inserted into the shredder
it will automatically operate in reverse. When
this occurs, remove the paper and re-insert
into the shredder in smaller quantities.
BAG FULL
• When the waste container is full, the FULL
LED will illuminate, and the shredder will
stop automatically. Open the door, remove
and empty the waste containers. Replace the
waste containers, close the door, and press the
START button to resume shredding.
OPEN
• When the door is open the OPEN LED will
illuminate and the shredder will not operate.
Close the door to resume shredding.