User guide

XBMC User Guide Page 40
CD Ripping settings tab
CDDA Rip Folder This option defines the location on
your hard drive that ripped tracks will be saved to.
(Note: To rip to a Samba share, you must define the rip
location via advancedsettings.xml.)
Track Naming Template Controls the way that your
ripped songs will be named. For a list of options that
can be used, see Tags Available for Audio Files
Encoder This option defines which audio encoder to
use when ripping.
Quality This option defines in which quality you want
to rip your files.
Bit Rate This option defines which bitrate to use for
the specified audio encoder for audio compression.
Network Settings
Network settings tab
Assignment Determines how the network addresses are
assigned to XBMC. You can choose between Automatic
(DHCP), Manual (Static IP), or Default (uses the
settings configured in your dashboard).
IP Address Allows you to set the IP address that
XBMC will use.
Netmask Allows you to set the netmask for the
network that your system is on.
Default Gateway Allows you to set the gateway for
your network. This should be the IP address of your
router or PC running Internet Connection Sharing.
DNS Server Allows you to configure the DNS server
used by XBMC. This should be the IP address of your
router, a PC running Internet Connecting Sharing, or a
valid DNS from your ISP.