User manual


 DocumentMT0100P.N
©XsensTechnologiesB.V. MTiandMTxUserManualandTechnicalDocumentation

39
Pin3 Reserved Z/B
Pin4 TX(sensor) Y/A
Pin5 RX(sensor) Reserved
Pin6 Reserved Reserved
Pin7 SyncIn Reserved

Fordefinitionofwirecolorsseenextsections.

TheoperatingtemperatureoftheUSB‐serialdataandpowercable(CA‐USB)is0°C‐40°C.

The MTi and MTx are designed to be used with the power supply supplied by Xsens (integrated in the RS‐
232/422/485toUSBcable).Itispossibletouseotherpowersupplies;howeverthismustbedonewithcare.
For safety and EMC any power supply used with the device must comply with the Electromagnetic
Compatibilitydirective.
6.4.2 PinandwirecolordefinitionsMTi‐28A##G##(MTiRS‐232,standardversion)

MTihousingsocket
ODUL‐series7pinfemalesocket(receptacle)backview(solderbucketview)
ODUproductcode:GL0L0C‐T07LCC0‐000


MTiUSB‐serialcableplug(CA‐USB2)
ODUL‐series7pinmaleconnector(plug)backview(solderbucketview)
SoldercontactforAWG28wire
ODUproductcode:S10L0C‐T07MCC0‐5200


PindefinitionsMTiplug/socketandwirecolor

Signal ODUpin
VCC Pin1
GND Pin2
AnalogIN Pin3
1
2
3
4
5
6
7
6
1
5
4
3
2
7