GB Engl ish PORTABLE CD PLAYER WITH CASSETTE RECORDER TP-463 INSTRUCTION MANUAL HELPLINE NUMBER: 0870 100 2525
WARNING : TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE WARNING : SHOCK HAZARD-DO NOT OPEN This marking is located on the rear of the unit The lighting flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
SAFETY INSTRUCTIONS 1. READ INSTRUCTIONS-All the safety and operating instructions should be read before the appliance is operated. 2. RETAIN INSTRUCTIONS-The safety and operating instruction should be retained for future reference. 3. HEED WARNINGS-All warnings on the appliance and in the operating instructions should be adhered to. 4. FOLLOW INSTRUCTIONS-All operating instructions should be followed. 5.
LOCATION OF CONTROLS AM / FM Antenna Tuning Knob CD Door Function Selector Band Selector Open / Close Volume Control Dial Pointer Cassette Record Key Cassette Play Key Cassette Pause Key Cassette Stop / Eject Key Cassette Reverse Key Cassette Forward Key LED Display FM Stereo Indicator Power Indicator Stop Button Play / Pause Button Skip- Button Program Button Skip+ Button Repeat Button Cassette Door E-3
LOCATION OF CONTROLS Head Phone Jack Handle DC Compartment AC Jack POWER SOURCES AC POWER You can power your portable system by plugging the detachable AC power cord into the AC inlet on the back of the unit and into a wall AC power outlet. Check that the rated voltage of your unit matches your local voltage. Make sure that the AC power cord is fully inserted into the unit. BATTERY POWER Insert 6“C” size batteries in the Battery Compartment.
LISTENING TO RADIO OPERATION 1. SET THE FUNCTION SELECTOR TO "RADIO" POSITION. 2. SELECT THE DESIRED RADIO FREQUENCY BAND WITH BAND SELECTOR. 3. TURN THE TUNING CONTROL TO SET THE DIAL POINTER TO THE STATION FREQUENCY AS DESIRED. 4. ADJUST VOLUME CONTROLS FOR THE DESIRED VOLUME LEVEL. FM & FM-STEREO RECEPTION • • SET THE BAND SELECTOR AT "FM" POSITION. PROGRAMS ARE RECEIVED IN MONO MODE. IN PARTICULAR WHEN STEREO SIGNALS ARE WEAK. IT IS PREFERABLE TO RECEIVE THE PROGRAM IN MONO.
CD OPERATION PLAYING COMPACT DISC • GETTING START 1. SET THE FUNCTION SELECTOR TO "CD" POSITION. OPEN THE CD COMPARTMENT WITH THE OPEN HANDLE. PUT A CD INTO THE COMPARTMENT AND CLOSE THE CD DOOR. 2. FOCUS SEARCH IS PERFORMED IF DISC IS INSIDE. TOTAL NO. OF TRACKS IS READ. Repeat 1/ Repeat all Indication Play / Pause Indication • PLAY/PAUSE MODE 1. IF PLAY/PAUSE BUTTON IS PRESSED DURING STOP MODE, THE FIRST TRACK WILL BE PLAYED AND THE PLAY/PAUSE LED WILL BE TURNED ON. 2.
CD PROGRAMMING UP TO 20 TRACKS CAN BE PROGRAMMED FOR DISC PLAY IN ANY ORDER. TO PROGRAM 1) 2) 3) 4) 5) 6) SET IN CD MODE. PRESS THE PROGRAM BUTTON, DISPLAY WILL SHOW 01 AND FLASH. SELECT A DESIRED TRACK BY USING THE SKIP BUTTONS. PRESS THE PROGRAM BUTTON TO ENTER THE TRACK INTO SETTING. LED DISPLAY CHANGES TO 02. REPEAT 3~5, UP TO 20 TRACKS. TO COMPLETE PROGRAMMING AND START PLAY PRESS PLAY BUTTON, PROGRAM PLAY STARTS AUTOMATICALLY.
SPECIFICATIONS GENERAL Power Supply: Power Consumption: Output Power(RMS): Terminal impedence: Unit Dimensions: Net Weight: Gross Weight: 230V~50Hz 12Watt 1.2W x 2 Speaker 8ohms,Phones 32ohms 290(L) x 219(W) x 144(H)mm 2.0kgs 2.6kgs CASSETTE SECTION Tape Speed: Recording System: Erasing System: Frequency Response: 4.75cm/sec AC BIAS DC MAGNET 125-6300Hz CD SECTION Channels: S/N Ratio: Sampling Frequency Disc Size: 2 Channels 60dB 44.
