Installation Guide
WATER SUPPLY KIT
Connecting the water line to the refrigerator.
(Necessary parts are available at local service agents.)
1. Connect water line to the compression fitting.
- If you are using copper tubing (not supplied), slip the 
 compression nut (not supplied) and ferrule (not supplied) 
 on copper tubing.
- If you are using plastic tubing (not supplied), insert the 
 molded ending of the plastic tubing into the compression 
 fitting.
2. Tighten the compression nut onto the compression 
 fitting.
3. Turn the water on and check for any leakage.
1










