Installation Guide

Removing right refrigerator door

1. Turn top hinge fastener counterclockwise and remove

the top hinge.(After the hinge is removed the door can

fall down forward. Be careful!)

2. Lift up the door and remove it.( The same as step4,

step5 in the removing the left refrigerator door)

Removing freezer door

Open freezer door as far as possible, pull up freezer

case and freezer drawer.

Push locks(on both sides) and pull forward Freezer

door and remove.

Replacing refrigerator doors

- Replace the left door, right door, then replace the top

hinge cover.

- Replacing steps are the reveres of the steps of removing

the doors.

Replacing freezer door

Align the end of rails(both sides) with supporter of

freezer drawer rail

Fully push and close freezer door , check locking of the

rail with the lock of supporter

Open the freezer as far as possible, assemble one

gear rail in supporter of rail gear.

Push and assemble another gear rail on opposite side

of the rail

Refrigerator Leveling &

Door Adjustment

(If needed. )

The refrigerator must be level in order to maintain optimal

performance and desirable front appearance.

(If the floor beneath the refrigerator is uneven, The freezer

and refrigerator doors look unbalanced.)

leveling and door adjustment

Leveling the appliance

Remove the front cover, if it is attached.

Use a hexagonal wrench to align the front of the

appliance.

Adjusting a refrigerator door

If the height of the refrigerator doors is uneven, turn the

screw nut on the lower hinge to adjust the refrigerator door.

- To raise a refrigerator door turn the screw counterclockwise.

- To lower a refrigerator door turn the screw clockwise.