Installation Guide

9
Be sure to
unplug first
Care & Cleaning
⇡
⇢
⇣
⇤
⇥
⇦
⇧
*
This instruction manual refers to several models. The real features are model dependent.
❶ Water Dispenser
●Remove the strainer and clean the water collecting
tray with a sponge or absorbent cloth.
❷ Ice cubes storage Case
● Removing: Press the release button and remove the
ice cube container.
● Cleaning: Empty the ice cube container and clean
with tepid water.
Thoroughly dry the container and screw conveyor to
prevent new ice cubes from sticking.
●Replacing: Push the ice cube container all the way
back onto the supports until it locks into position.
If the container cannot be pushed all the way back ,
rotate the swirl coil a quarter turn and insert again.
❸ Freezer & Refrigerator Bins
●Hold both ends and pull up.
❹ Refrigerator Shelves
●Lift up and pull the shelf , unhook and then remove
the shelf. You can replace it at varying heights.
●To place taller items such as tall
bottles, you can remove the small
glass shelf and place it in the holder
under the icemaker.