Specifications

Below process is for RN-420N…423N (Refrigerant type : R-600a) models.
Some parts are differ to RN-420N…423N models. ( Hinge Cover, Door Switch, Wire Harness and Button Door Switch. )
When you change door opening direction (Refrigerant type : R-600a), please refer page 20 (Door switch Disassemlby) and belo
w
How to change Door opening Dirction (Reversable)
No No
After hiding door wire harness, remove the button Door
Remove top cover hinge screw with (+) driver. Switch and Cover Bushing.
After unscrewing the Cover Hinge Harness *T *L,
Separate the Cover hinge by using driver. disclose the door wire harness.
Reassemble the cover and button door switch.
And also assemble the door stopper to opposite side.
Remove the Door Switch from the cover hinge. (Which is located the Door under Cap. )
Remove the Middle Hinge.
Disconnect all wire connector and hinge. Assemble Cover Bushing & Stopper to the opposite.
a. Change the location
(screw & division hinge cap
)
b. Change the unnder hing
e
Unscrew the Cover Hinge Harness *T *R location to the opposite.
and hide the door wire harness.
Procedure
72
61
510
38
49
Procedure
Refrigerator Door Cap
Hidden
Wire
Button
Cover Bushing
Stopper
Freezer Door
24