Technical information

65
AUTOMATIC PUSH-BUTTON PULL-CABLE
ALL NOZZLES ARE A STANDARD 1” IN LENGTH.
For Nozzles in 1 1/4” length, add the suffix (125) to the part numbers above. Example: 78137-125
For Nozzles in 2” lengths, add the suffix (200) to the part numbers above. Example: 78137-200
ALL NOZZLES ARE A STANDARD 1/8” NPT THREAD SIZE 1/4" BUSHING 78604
Custom thread size adapters are available upon request.
NOTE:
A
F next to the Nozzle numbers in the chart above indicate the Nozzle included in any standard KATS Ether
Start standard kit. Example: 78137
F is the nozzle included in the 33250 KATS Start system.
KATS Start Systems include the correct Nozzle size and standard orifice spray pattern. Orifice spray pattern
requirements may vary from one installation to the next. Spray pattern is dictated by manifold port location.
500 & UP
300 - 499
78137 F
79942 F
500 & UP
200 - 499
78138F
78137F
500 & UP
200 - 499
78138F
78137F
500 & UP
300 - 499
200 - 299
100 - 199
78599
79939
79940 F
79941 F
500 & UP
200 - 499
100 - 199
79943
78599
79940F
500 & UP
200 - 499
79943
78137
500 & UP
300 - 499
200 - 299
100 - 199
78600
79944
79946
79947
500 & UP
200 - 499
100 - 199
79175
78600
79946
500 & UP
200 - 499
79175
78600
500 & UP
300 - 499
79947
79948
500 & UP
200 - 499
79949
79947
500 & UP
200 - 499
79949
79947
500 & UP
300 - 499
200 - 299
100 - 199
79950
79951
79952
79953
500 & UP
200 - 499
100 - 199
79954
79950
79952
500 & UP
200 - 499
79954
79950
500 & UP
300 - 499
200 - 299
100 - 199
79955
79956
79957
79958
500 & UP
200 - 499
100 - 199
79959
79955
79957
500 & UP
200 - 499
79959
79955
F NOZZLE IN STANDARD KITS
NOZZLES
NOZZLES ARE THE HEART OF THE KATS ETHER START SYSTEM.
Nozzles must be able to vaporize Fast Flash Fuel, meter the delivery of the fuel, and
prevent manifold “back-flash”, without failure. All Nozzles contain a filter assembly
rated at 25 microns, which prevents possible engine “blow-by” from clogging the
nozzles and nylon tubing. The filter assembly helps prevents foreign contamination
from installation.
TO ORDER NOZZLES SPECIFY BY: ENGINE CID, KATS ETHER SERIES NUMBER,
AND ORIFICE DESIGN AND MANIFOLD PORT LOCATION.
ENGINE CID PART NO. ENGINE CID PART NO. ENGINE CID PART NO.
33200 33100
33180
Straight Dual Side (SDS)
Straight End (SEN)
Straight One Side (SOS)
Elbow Dual Side (EDS)
Elbow End (EEN)
Elbow One Side (EOS)