Technical information

DUAL NOZZLE
ADAPTOR KIT
Valve T-fitting 1/8” Tube x 1/8
NPT, 4 feet nylon tubing (TBN-
005), compression nuts and
sleeves. Converts single
manifold ether injection to dual
injection type.
NOTE: See next
page for ordering extra Nozzles
PART NO. 79936
VALVE FITTING, STRAIGHT
DESIGN, COMPRESSION
NUT & SLEEVE
Fits all Jet-Start Series
actuator valves. 1/8” Tube
x 1/8” NPT. Five (5) per
pack.
PART NO. 79935
NYLON TUBING
Five (5) feet,
1/8” O.D. x .078 I.D.,
operating pressure to 625
PSI, burst pressure to 2500
PSI, temperature range -65°F
(-54°C) and above. Melt down
temperature 490°F. Type 6/6.
PART NO. 78593
NUT AND COMPRESSION
SLEEVE KIT
1/8” Cone Style.
Ten (10) per pack.
PART NO. 79934
VALVE FITTING, ELBOW
DESIGN, COMPRESSION
NUT & SLEEVE
Fits all Jet-Start Series
actuator valves. 1/8” Tube
x 1/8” NPT.
Five (5) per pack.
PART NO. 78592
PULL CABLE KIT
Fits all 33180 Series,
5 foot length, 50” sleeve,
with barrel sleeve clip
and instructions.
PART NO. 78594
T
FAST FLASH FUEL CYLINDERS
FC ORDER NUMBERS
AND DESCRIPTIONS:
Single Flash Fuel
Cylinder 18 oz. 1"
Part No. 78132
Cylinder 18 oz.
7
⁄8"
Part No. 78133
Cylinder 21 oz.
Part No. 78135
KATS work on all
competitors starting
system.
Cylinder Gasket
(Pk of 12)
Part No. 79708 1"
Part No. 79970
7
⁄8"
Cylinder Valve
Adapter Kit
Part No. 33120
Adapts 1” Actuating
Valves to accept 7/8”
Fast Flash Fuel Cylinders.
Includes gaskets and
protective cap.
he superiority of the
KATS Fast Flash Fuel is
backed by cold room
tests conducted by the
United States Department of
the Army, at Fort Blevoir,
Virginia. Faster starting
times down to a freezing
-65°F (-54°C), are the major
result of our superior fuel
formula.
Our proprietary formula
contains 80 - 90% High
Grade Ethyl Ether, 20 - 25%
more than our competition.
Less than 1% special
lubricant is mixed within
each fuel cylinder to
provide upper cylinder
engine lubrication. The
balance of the formula
components are proprietary.
• 18 or 21 Ounces of Fast Fuel
Mix.
• 200 Starts Approximately.
• Ethyl Ether at 99% Purity or
Better.
• Non-Clogging Formula.
• Cylinders Rated at 1000 Pound
Test Burst Pressure.
• Cylinder Relief Valve Pressure
up to 650 PSI Max.
• Fuel cylinders are pressured
from 140 to 170 PSI at 70°F.
• Sizes Available in 7/8” or 1”
Thread * See Below
• DOT Specified Safety and
Caution Labeling
• Meets Federal Safety
Specification 0-F-1004B
• Material Safety Data Sheets
(MSDS) Available Upon
Request.
• All cylinders come complete
with Protective Caps to
eliminate dust, moisture, or
debris during storage.
SPECIFICATIONS:
FAST FLASH FUEL
* Specify neck thread size of 1” or 7/8”
64