Technical information

KATS MODEL PUSH BUTTON SERIES
THE KATS SERIES IS A PUSH BUTTON
ELECTRIC OPERATED ETHER INJECTION SYSTEM.
he Push Button Series has all the great high quality
features of the Automatic Series except the
operator has “limited control” over the use of the
system.
Providing the engine temperature is at 50°F or below, the
operator engages and releases the push button at the
dashboard or suitable location, causing a 5 - 6 cc metered
shot of Fast Flash Fuel to be injected into the engine
manifold. ONLY one (1) metered shot of fuel can be
injected per push of the button. Holding the push button
down WILL NOT allow a continuous flow of ether fuel to
the engine.
This system is even designed to operate at battery voltage
as low as 6.5 volts. This is especially important for “low
battery” cold weather cranking which often bogs down the
starting of the engine.
Each type of equipment or engine may have its own
personality for which the Push Button System can be an
excellent choice.
EACH 33100 SERIES KIT CONTAINS:
APPLICATION AND ORDERING GUIDE
ENGINE CID MODEL NUMBER
12 VOLT 24 VOLT
500 and up 78609 78610
300 — 499 78142 78608
100 — 299 78151 79987
Universal Kit
F
78140 79986
F Includes three (3) NOZZLES for all the Engine CID Sizes listed above.
F Excellent for the Stocking Warehouse / Distributor.
NOTE: All models numbers come without fuel cylinders.
T
Actuating Valve Assembly, Heavy Duty
Rigid Mounting Plate and Clamp
Assembly with all hardware, Nozzle with
Built-In Filter Assembly, Thermostat
+50°F (+10°C) Surface Mount Type, Push
Button Switch and Dash Decal SPST 10
Amp — Momentary ON, Nylon Tubing
(4 Feet), Electrical Wiring Kit with
Terminals (12 Feet — 16 Gauge),
Protective Caps, Plugs, & Gaskets,
Installation Instruction Guide
Three (3) Year Limited Warranty
61