Technical information

33
Installation Information
DETROIT DIESEL
Replaces pipe plug in front face of cyl. bank
on driver’s side or pipe plug in oil cooler
elbow pipe. Pipe bushing may be required.
Pipe plug not available on all engines.
RS
1 1/2" frost plug on right front
Engines built prior to September 1993
Replaces 3rd or 4th frost plug on left side
of engine. Engines built after Aug. 93:
install in boss on left side of engine
Installs in frost plug hold behind
oil cooler
Replace water jacket place on left side
of engine
1991 & older replaces 1" pipe plug in
water pump; 1991 & newer replaces 1"
plug in oil cooler casting
Replaces pipe plug in left front of block
Install in 1 5/8" frost plug on left center
of engine
Install on right side
Replaces 3/4" pipe plug on right front
side of block
FIAT
Installs in 42mm threaded opening on
right rear of engine
1" pipe in coolant casing
FORD
Replaces front frost plug on right side
of engine
Replaces 2nd frost plug from rear,
right side