RC2200 (EN).indd 1 SPECIFICATIONS Model RC-220 Rating 230V~50Hz Watts 1500W Weights(net) 4.1kg Dimension(L X H X D) 350 X 280 X 210mm Cord length 5 m 2007.7.
NAMES OF PARTS AND OPERATION TECHNIQUE HOSE CONNECTION SUCTION CONTROL • Connecting the hose : insert • Disconnecting the hose: press the hose firmly into the hose the button and pull the hose inlet. (“Click”) out of the vacuum cleaner. • The suction power control at the hand grib enables you to control suction power. EXTENSION PIPE • Press the button in the direction shown by the arrows and pull (or push) the pipe.
ROL rol at you to CORD REWIND BUTTON • Rewind the power cord by pressing the cord rewind button. ON/OFF SWITCH • Press the on/off switch. DUST METER • When the colour of the dust meter is changed to RED for long time, change the dust bag. PRACTICAL PARKING brush clip STORAGE rest CE NOZZLE COMBI CREVICE NOZZLE RC2200 (EN).indd 3 • If you want to stop vacuum cleaning for a while, you can place the brush clip into the rest.
NAMES OF PARTS AND OPERATION TECHNIQUE EXHAUST FILTER • Switch off. • Pull the filter case outwards from the cleaner. • Separate the filter from the filter case and shake the dust out of the filter. MOTOR PROTECTION FILTER • Switch off and open the cover. • Hold the cover while taking the filter out of the cleaner. • Shake the dust out of the filter. CHANGING THE DUSTBAG • Switch off and open the cover. RC2200 (EN).
PRECAUTIONS FOR SAFE USE This vacuum cleaner should only be used for normal dry household dust and dirt. The manufacturer cannot be responsible for any damage caused by use or operation of the cleaner contrary to these instructions. If the cleaner is wrongly operated for a purpose other than that for which it is intended, no liability can be accepted for any possible damage.
BEFORE ASKING FOR SERVICE Before Asking for Service, please check each item below if you have trouble with your cleaner. Problem Check Point Measure Suction power is weak. • Dust bag • Pipe or hose If dust bag is dirty, replace it. If clogged or blocked, remove the object. The cleaner does not work. • Power cord • on/off switch Check if power cord is plugged. Check if the power switch is turned on. Power cord does not rewind.