USER’S GUIDE TFT-LCD MONITOR Model No :L710SC
IMPORTANT SAFEGUARDS 1. Read all of these instructions. 2. Save these instructions for later use. 3. Unplug this monitor from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 4. Do not use attachments not recommended by the monitor manufacturer as they may cause hazards. 5. Do not use this monitor near water, e.g., near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, etc. 6.
CONTENTS Introduction ............................................................................. 1 Product Features ................................................................. 2 Setup ......................................................................................... 3 Connecting the 15 Pin Signal Cable and Power Cord ......... 3 Connecting the Others .........................................................4 Operation & Adjustment ......................................................
SETUP PRODUCT FEATURES CONNECTING THE 15 PIN SIGNAL CABLE AND POWER CORD The monitor is designed for use in a small work area. The convenient and user-friendly on-screen display allows for easy and accurate adjustments of screen size, position and screen color. The monitor complies with the VESA Display Data Channel (DDC) specification for Plug and Play compatibility. Advanced microcircuitry makes setup and configuration fast and effortless.
OPERATION & ADJUSTMENT CONNECTING THE OTHERS CONTROL PANEL 2 POWER Indicator 1 POWER shows both normal operation and power management status with power indicator light. switches the monitor on and off. 1. Plug the connector to the BNC IN/OUT port 1 on the rear of the monitor. 2. Plug the connector to AUDIO INPUT port 2 , 3 on the rear of the monitor 5 4 3 3. Plug the headphone to headphonejack 4 on the rear of the monitor.
HOT KEY KEY PROCESS MENU AUTO When there is no OSD, if you press this AUTO button, you can use the best display performance fit for a current mode. AU TO T R AC K I N G 1280 x 1024 OSD Contrast Picture Brightness 100 - Function Gamma OSD Menu Color Temp. 9300 Misc. 75Hz 95 - Color Color Adjust Sound 0 1280 x 1024 + + 1 2 3 6500 Contrast Picture Brightness 100 - Function Gamma SELECT User OSD OSD Menu EXIT Misc. 75Hz 95 - Color 0 Color Temp.
OSD FUNCTIONS WITH USING PC ADJUSTMENT PROCEDURE COLOR No Is the H.Size proper? Adjust the CLOCK control. CONTRAST Adjust the contrast of image, the difference between light and dark areas on the screen. BRIGHTNESS Adjust the brightness of image. GAMMA Adjust the gamma correction. COLOR TEMP. Choose different preset color temperatures or set your own customized color parameters. COLOR ADJUST Adjust the color. Yes Is the noise displayed on the screen? Perform the AUTO POSITION.
OSD MENU OSD OSD FUNCTIONS WITH USING VIDEO PICTURE LANGUAGE Select language for OSD. CONTRAST Adjust the contrast of image. OSD H &V POS. Adjust the OSD position horizontally (left or right) and vertically (up or down). BRIGHTNESS Adjust the brightness of image. OSD TIMER Adjust the display OSD Menu. SATURATION Adjust saturation of image. Tranlucent Adjust the OSD. Transparency HUE Adjust the hues of image. SHARPNESS Adjust the display image quality (if the screen proceed to scaling up).
SPECIFICATIONS SELF DIAGNOSIS Panel If there is no image, the Self Diagnosis screen will be displayed. Self Diagnosis function checks if the status of the monitor screen is No Signal, Out of range or None support. No Signal screen is displayed when the DSub signal connector is connected but the status of the monitor is on DPMS mode. Synchronization Out of Range screen is displayed when the applied frequency is under or over normal range.
FACTORY PRESET TIMINGS Weight-net/gross Power Saving Tilt Range Operating Temperature 6.2 / 7.6 Kg (13.6 / 16.7 Lbs) EPA, VESA DPMS, Nutek Compliant 5° forward, 30° backward 10 ~ 40°C /50 ~ 104°F The specification can be changed without any prior notice to improve the quality of the product. The LCD panel may have some defective pixels (e.g. slightly light or dark) due to a characteristic of the LCD panel. But there is no defect in your LCD product itself.
CHANGING THE STAND ATTACHING THE MONITOR WITH THE ARM-STAND(OPTION) Removing Original Stand Turn off the monitor and pull out the power cable. Place a cushion or a soft cloth on the floor and put the product on it with the front of the monitor facing the floor. Support stand Surface for stand installation Tighten up screws at the locations indicated by arrows. 2 This monitor’s installation surface is compatible with various kinds of VESA standard stands.
TROUBLESHOOTING Symptom Check Picture is jitterd. Adjust Clock to set the screen position and adjust Clock fine until a noise isn’t displayed. No picture. Check if power switch and computer power switch are in the on position. Symptom No sound. Check Check the audio cable are correctly connected to the computer. Adjust the volume after checking the sound is muted. Check the audio system in the computer. Check if the signal cable is correctly connected to the video card. Low sound.
S/N:9978634929
