Technical data

Sat-Sun
Event Time Temp°C
1 07.00 20
2 16.00 21
3 23.00 15
4 00.00 15
5 01.00 15
6 01.59 15
To adjust the factory pre-settings and set
your own time and temperature
programmes
For Days 1-5 (weekdays)
a) Press PROG (Fig.2) 3 times to show the
1st pre-set time and temperature
(Event 1 Days 1,2,3,4,5) (Fig.6)
b) Use + or – buttons (Fig.3) to adjust the
TIME (press and hold to change in 10 min
increments)
c) Use or buttons (Fig.7) to adjust the
TEMPERATURE
d) Press PROG (Fig.2) to move to next
preset time & temp (Event 2) (Fig.8)
e) Repeat steps b, c & d for programming
Events 3, 4 5 & 6
For Days 6-7 (weekends)
a) Press PROG (Fig.2) to show 1st pre-set
time and temperature (Event 1 Days 6-7)
(Fig.9)
b) Repeat steps b, c and d above to
programme time and temperature events
for the weekend.
Returning to RUN mode
Press PROG (Fig.2) – the colon in the LCD
display will start to flash (Fig.10)
Temporary User Overrides
The TP5000 has several useful overrides
which can be selected without affecting the
thermostat programming
- Selection of time or actual room
temperature in main LCD display – press +
and – together to change between settings
(Fig.11)
- Temporary override of programmed
temperature – press or until required
temperature is displayed (override will
automatically cancel at beginning of next
programmed event) (Fig.12)
- Temporary use of weekend programmes –
press and together once (override
cancels at 2:00am) (Fig.13)
- Frost Protection – a constant low
temperature can be selected whilst away
from home - press and together
twice (Fig.14). To return to automatic
programming press and together
again
Summer Time / Winter Time Clock
- To change from Summer to Winter (clocks
back) - press and hold - button (Fig.15)
- To change from Winter to Summer (clocks
forward) - press and hold + button (Fig.15)
Fitted Equipment
71
Fig 1.
Fig 2.
Fig 3.
Fig 4.
Fig 6.
Fig 5.
Fig 8.
Fig 10.
Fig 9.
Fig 7.