Technical data

Fitted Equipment
64
Symbol Function Description
Circulating The pump is to be switched off when only hot water is required. The heating cartridge/LPG boiler is then
Pump On/Off operated by the boilers built in thermostat.
The pump is to be switched on when both hot water and heating is required. With this switch in the on
position the circulating pump is controlled by the TP5000 programmable room thermostat. The operation
of the heating cartridge/LPG boiler is then operated by the boilers built in thermostat.
Gas Burner This LED indicates when the gas burner is in an operating, rather than pilot, stage.
Flame Indication
Fault Warning This LED indicates that the LPG boiler is in blocking mode – that the burner has not ignited, or has gone
out for some reason.