Service manual

8
OPERATIONS AND FUNCTIONS
Wattage output chart
The power-level is set by pressing the POWER pad. The chart shows the display, the power level and the percentage
of power.
This section includes useful information about oven operation.
1. Plug power supply cord into a standard 3- pronged 12 Amp, 230V AC 50Hz power outlet.
2. After placing the food in a suitable container, open the oven door and put it on the glass tray.
The glass tray and roller guide must always be in place during cooking.
3. Shut the door. Make sure that it is firmly closed.
Touch Power Level pad Power Level (Display) Approximate Percentage of Power
once HIGH 100%
twice PL-9 90%
3 times PL-8 80%
4 times PL-7 70%
5 times PL-6 60%
6 times PL-5 50%
7 times PL-4 40%
8 times PL-3 30%
9 times PL-2 20%
10 times PL-1 10%
11 times PL-0 0%
Make sure the oven is properly installed and plugged into the electrical outlet.
The oven light is on only when the microwave oven is operating.
The oven door can be opened at any time during operation by touching the door release button on the control panel. The
oven will automatically shut off.
Each time a pad is touched, a BEEP will sound to acknowledge the touch.
The oven automatically cooks on full power unless set to a lower power level.
When the oven is plugged in, the display will show “HAVE A NICE COOKING TIME PRESS CLEAR” and “CLEAR”
blinks three times.
Time Clock returns to the present time when the cooking time ends.
When the STOP/CLEAR pad is touched during the oven operation, the oven stops cooking and all information is
retained. To erase all information (except the present time), touch the STOP/CLEAR pad once more. If the oven door is
opened during the oven operation, all information is retained.
If the START pad is touched and the oven does not operate, check the area between the door and door seal for obstruc-
tions and make sure the door is closed securely. The oven will not start cooking until the door is completely closed or the
program has been reset.
1
2
3
4
5
6
7
8