Service manual

2) KOR-1A4G/H

1) Remove the screw which secure the control panel, push up two snap fits and draw forward the control panel assembly.

2) Remove four screws which secure the PCB assembly to control panel.

3) Disconnect membrane tail from the connector of the PCB assembly.

4) Detach membrane from the control panel.

5) Reverse the above steps for reassembly.

REF NO. PART CODE PART NAME DESCRIPTION Q'TY REMARK

B01 3511604800 DECORATOR C-PANEL STS304 T0.6 1

B02 3518522130 SWITCH MEMBRANE KOR-1A4G0A 1

3518522140 SWITCH MEMBRANE KOR-1A4H0A/1A 1

B03 3516722320 CONTROL-PANEL ABS AF-315/345 HFA-700HT 1

B04 3514321910 PCB AS KOR-1A1G0A 1

B05 7122401211 SCREW TAPPING T2S TRS 4* 12 MFZN 3

DISASSEMBLY AND ASSEMBLY