Operation Manual
9
VOR DEM BETRIEB
Wenn Ihr Herd angeschlossen wird, erscheint im Display eine blinkende “:0” und es ertönt ein Signal. Nach einem Netzstromausfall zeigt
das Display “:0”, wenn die Stromzufuhr wiederhergestellt ist.
Ihr Herd verfügt über ein 12-/24-Std.-Uhrzeitsystem. Um die Uhr einzustellen, gehen Sie wie folgt vor.
EINSTELLEN DER UHR
Example : To set 10:25
1. Press Clock button once. (example : to set “10:25”)
The display will be “12H” shows.
Press Clock button once more, “24H “shows in display.
This is a 24hour clock system. If you want 12hour clock
system, omit this step.
2. Turn the Control Dial Knob to set the hour number
“10: “.
The hour number starts blinking, the colon will right.
3. Press Clock button. “10:00” shows in display.
The minute number starts blinking, the colon and hour
number will light.
4. Turn the Control Dial Knob until “10:25” in the display
window
5. Press Clock button. The colon starts blinking.
Note : If you selected 12hour clock system, this digital clock allows you to
set from 1:00 to 12:59.If you selected 24hour clock system, this digital
clock allows you to set from 0:00 to 23:59.