Service manual

14
10. To remove Guide air assembly parts.
1) Remove two screws (G06) and pull out Guide air assembly.
2) Remove a screws (G07) and pull out the lamp.
3) Remove two screws (G08) and pull out the two spring terminals.
4) Remove two screws (G09).
5) Pull out the motor and the bracket damper.
6) Reverse the above steps for reassembly.
NO PARTS CODE PARTS NAME DESCRIPTION Q'TY REMARK
G01 3512525200 GUIDE AIR PP GP-2300 1
G02 3513601500 LAMP BL 125V 25W 1
G03 3515102700 SPRING TERMINAL SUS301 T0.5 2
G04 3966820200 MOTOR SYNCRO 120V 2W GM-16-12F17 1
G05 3510609100 BRACKET DAMPER SBHG T0.7 1
G06 7112401011 SCREW TAPPING T1 TRS 4X10 2
G07 7112401011 SCREW TAPPING T1 TRS 4X10 1
G08 7121400611 SCREW TAPPING T2S PAN 4X6 2
G09 7121400611 SCREW TAPPING T2S PAN 4X6 2