Specifications

Power Train Testing and Adjusting
58
Adjustment of Crown Wheel
1. Torque crown wheel bolts to 80 N·m (59 lb·ft).
2. Install differential assy., to previously mounted
position (rotate both nuts simultaneously to maintain
bearing preload).
3. Tap on both sides of the differential to achieve
correct position of bearing cups.
4. Check backlash between pinion and crown gear in 3
different positions. Backlash shall be 0.15-0.25mm
(0.006-0.010 in)
5. Check contact face by rotating pinion in both
directions, hold back crown wheel.